What should I do if the faucet leaks?

Release time:05-11-2019
Abstract:

Regarding the repair of water leakage, the reason for t […]

Regarding the repair of water leakage, the reason for the water leakage is caused by the damage of the water sealing tape of the faucet part (fixed screw). Therefore, just use the wrench to remove the faucet and re-roll the new water-stop tape at the place where the screws are fixed. The following are the maintenance steps:

1. First, tighten the faucet first, and use a wrench to turn the faucet counterclockwise.
2. Thread the hole outward and wind it 5-6 times with the sealing tape on the threaded part.
3, see if the faucet has been adjusted, use the water pipe wrench to enter the clock direction.
4. After the installation is complete, try to open the main switch and check to see if it will leak.

www.zjhyd.com