What are the installation steps and precautions of electric water faucet? (1)

Release time:06-15-2020
Abstract:

When there is no hot water supply pipe installed at hom […]

When there is no hot water supply pipe installed at home, or when the home does not want to open hot water, the whole house is opened and wastes resources, so many families will choose to install additional electric hot water faucets, also known as hot water faucets. How to install the electric faucet at home?
1. When installing the electric hot water faucet, we must first pay attention to check the electricity meter and circuit. For the current normal electricity consumption environment: electricity meter capacity 5 (20) A, open circuit 16A, power cord cut 2.5 square millimeters and normal tap water pressure of about 2KG, all Safe to install and use. Water is cold in winter, and it is more quiet to use. Generally, it is better to choose a product with a higher power. However, it is also necessary to consider the actual situation. A meter and circuit can meet the requirements, and a house with a relatively large water pressure can choose power. 3000w.
2. The installation only needs to be the same as the ordinary faucet, please refer to the product manual attached to the product during installation.
3. First of all, make sure that the three wires are connected reversely, generally left zero (blue wire) N, right fire (brown wire) L, upper ground (two-color wire yellow-green).
4. When using the electric hot water faucet for the first time, you should pay attention to install the electric hot water faucet, turn on the faucet (the hot and cold position is casual), see the water is sprayed from the nozzle, and then connect the power supply, continue to use the future without having to consider the above process Is to prevent dry burning accidents). Then open to the hot water position, the indicator light under the handle is on (the indicator color is blue), indicating that it is heating, if it is not on, you need to check whether there is no power supply or the water pressure is too low.