Method for extending the service life of electric faucet products

Release time:10-13-2018
Abstract:

1. The temperature of the hot water tap is determined b […]

1. The temperature of the hot water tap is determined by the water flow. The water flow can be controlled by the handle. The water flow rate is relatively low. The water flow rate is high, but the water flow cannot be too small to avoid over temperature. The fuse inside the warm machine will be automatically melted, resulting in the machine not heating properly, you need to contact the local distribution maintenance department).
2. After using the hot water in the hot water faucet, do not rush to turn off the faucet. Open the handle in the direction of cold water, and let the residual heat flow out to the middle water stop position. (This way to prevent the temperature from being too hot when the next use, but also to better protect the machine and extend the life of the product).
3. If you do not need hot water in summer, the hot water tap can also be used as a common tap. If you unplug the power plug and do not touch the water, try not to splash a lot of water on the machine itself, but it is inevitable to wash it in the kitchen, but always wipe the product to keep the product clean.